Harley Davidson Softail Motorcycles EZ-Steer Installation Manual

download
Softail EZ-Steer Instruction Supplement Installation of the Champion EZ-Steer system is similar to the installation of the OEM triple clamps of your Harley Davidson Softail Motorcycle. We strongly recommend that you use your OEM service manual and follow the prescribed disassembly, installation and torque specifications (except where noted below) for the upper and lower clamp assembly. Installation Notes • Note the torque specifications for the items listed below. Item # Description (Qty) Torque Spec. (Lb.Ft.) N/A OEM Steering Stem Bolt (1) 35 7 7/16-20 x 1.5 Socket Head Cap Screw (2) 45 • The supplied fork tube extensions (Item #2) must be used with the Champion EZ-Steer system. • Do not torque the steering stem bolt until fork tubes have been installed to the assembly. • Remove O-rings from OEM fork tube ends and install to Champion fork tube extensions (Item #2) prior to installation onto fork tubes. • The supplied fork tube covers (Item #9) must be installed to lower triple clamp prior to installation of fork tubes. WARNING: If the Champion EZ-Steer system is installed on a motorcycle / sidecar combination and the sidecar is removed, the motorcycle is not safe to ride, and OEM triple clamps should be replaced.